BPTJC - F-15P29, F-124 SOFT WHITE ALKYD

  • MSDS: BPTJC
  • Manufacturer: SEAGRAVE COATINGS CORP OF VA
  • Product Name: F-15P29, F-124 SOFT WHITE ALKYD
  • National Stock Number: 8010-00N033669
Product Identification

Product ID:F-15P29, F-124 SOFT WHITE ALKYD
MSDS Date:06/11/1990
FSC:8010
NIIN:00N033669
MSDS Number: BPTJC

Responsible Party
SEAGRAVE COATINGS CORP OF VA
4030 SEAGRAVE AVE
PORTSMOUTH, VA 23701
US

Emergency Phone: 804-488-4411

Info Phone: 804-488-4411

Preparer: B.J.G.

Cage: 60163

Contractor
SHERWIN-WILLIAMS, SEAGUARD
PORTSMOUTH, VA 23704 US

Telephone: 757-397-2223

Cage: 60163

Ingredients

NAPHTHA PETROLEUM, HEAVY ALKYLATE C9-C12;(ODORLESS MINERAL

CAS: 64741-65-7

Fraction By Weight: 1%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


3 @ 20C.

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: 5%

ACGIH TLV: 100 PPM (MFR)


10 @ 20C.

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 20%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IRRITATION OF RESPIRATORY TRACT,
HEADACHE, DIZZINESS AND NAUSEA. SKIN/EYE:PRIMARY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR, RESTORE BREATHING. CALL MD.
SKIN:FLUSH WITH WATER. EYE:FLUSH IMMEDIATELY WITH LARGE AOUNTS OF
WATER FOR AT LEAST 15 MINUTES. CALL MD. INGEST:CALL MD IMMEDIATELY
.

Fire Fighting

Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:0.8%
Upper Limits:7%
Extinguishing Media:FOAM, WATER FOG, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA/FULL PROT
EQUIP.WATER MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS
BUILDUP/POSS AUTOINGIT/EXPLO WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, SPARKS, AND OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:AVOID BREATHING SOLVENT VAPOR. ENSURE ADEQUATE
VENTILATION. AVOID SPARKS, FLAMES, AND ANYTHING WHICH COULD CAUSE
FIRE. SOAK LIQUIDS WITH SAWDUST OR RAGS AND REMOVE. FLUSH WITH
WATER IF POSSIBLE. AVOID SKIN CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS SHOWN IN INGREDIENTS
SECTION.
Other Precautions:PROVIDE RESPIRATORY PROTECTION AGAINST FUMES
GENERATED DURING BURNING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR TYPES SUITABLE
FOR MATLS IN INGREDIENTS SECTION RECOMMENDED. NIOSH/MSHA APPROVED
CHEMICAL/MECHANICAL FILTERS REC WHEN VENTILATION RESTRICTED.
NIOSH/MSHA APPRVD AIRLINE T YPE RESPS/HOODS REC IN CONFINED AREAS.
Ventilation:SUFFICIENT VENTILATION, IN VOLUME & PATTERN, SHOULD BE
PROVIDED TO KEEP CONTAM BELOW CURRENT APPLIC OSHA PEL/ACGIH TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY.
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING/SMOKING. SMOKE IN SMOKING AREAS
ONLY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>302F,>150C
Vapor Density:HVR/AIR
Spec Gravity:1.76
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE LIQUID, MINERAL SPIRITS ODOR
Percent Volatiles by Volume:46.1

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CO*2 AND PROBABLY CO.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.